Recent content by Ashkicker

Yea the Plate and Levers are the same and everything is there from the kit. The rams will fit just not sure if the Valve would be the same if its was sold for a 773g to use on my S175. May have to make a trip to my Bobcat dealer to check if there's any hidden issues that might prevent me from...

Thats what i'm stuck wondering. From the instruction manual looks to run off the implement pump and i would assume they would be the same but was trying to confirm since Bobcat likes to make everything specific to the individual machines. Thanks for responding Tom.

Hello all I bought a Power Bob-Tach kit Part # 6735465 that is for a 773G and was wanting to knowing if it would work on a S175 i have. My main concern is whether the Valve Block will bolt up to my Pump. The Valve block in the kit is Part # 6676547. Any help would be greatly appreciated. Ashkicker

Hello to all, My question is i have a Bobcat Brand Trencher that was being used on my S175 a few years back and the user fried my implement pump while running the trencher. I repaired the bobcat (by dumping and flushing out the hydraulic system and pump replacement) but the trencher has sat for...

Thanks so much for the reply's it was a 2002 machine so it had the dash noted above so that helped. We used another 763 and hitting the override and got it up on the trailer. Now the work begins. Thanks again

Hello i'm sure this has been answered before i've look real quick with no luck....... I've got a bobcat 763 thats DOA and i need to get it up on a trailer, My question is i remember hearing if you disconnected a hose or something the machine would roll. ANy help would be great. Thanks again

Great I didn't try that will do tomorrow and let you know. Thanks so much Oldmachinist

Hello all hope everyone had a good Christmas. I got an S175 and changed out the fuel filter few days ago and primed the bulb to fill the filter up. the machine fired up but quit after it seemed to burn up what was in the line, now i cant get it to fire back up. Any ideas i blead out the drain on...

Thanks for all your response's, gave me some insight to whats others are doing. We worked it out, he's had it since august of 2010 and put 30 hours on it during that time at his suggestion we both was happy at a 1000 dollars so that comes out to 33 bucks an engine hour. It's something over the...

Hello all, I needing help coming up with a rental price on my bobcat s175...........Here's the deal, I let my co-worker rent my bobcat w/ Grapple bucket,Forks ,and Tooth Bucket back in 7/2010 and we never really set a price just said we'd work it out since he wanted to work on things around his...

Well Tazza you hit the nail on the head for what it needed, stopped out today to see the damage once the pump was open and needed everything you said. Looks like new it is. Thanks for your insight you are a asset to this forum.

Hi Murphr, I have a 371 that had the original engine and developed a ticking noise so I decide to replace the engine with another K 321 and once I received it from fed ex I found the crankshaft diameter with smaller so none of the 3 pulleys worked on it. Kohler made a motor just for the 371 that...

Hello haven't been on in a while i'm looking for some advice from everyone. my gear pump went out on my Bobcat s175 and wondering if there worth rebuilding or if i should just buy new (bobcat in my part of the country wants $700. for a new one.) also if rebuilding is recommend does anyone know...