Throttle Lever Moving

Help Support SkidSteer Forum:

nailsbeats

Well-known member
Joined
Feb 11, 2007
Messages
135
Is there some king of tension adjustment for the throttle lever on my 1997- 763. I was hauling gravel and the machine was shaking when on concrete due to the steel tracks and weight, anyway this was causing the machine to throttle down, the lever was moving back on its own. There must be a simple adjustment. Anybody?
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
There is usually a spring on the bolt that holds the lever to the chassis. You should be able to tighten it a touch to fix that problem.
Hopefully its the same as other models.
 

skidsteer.ca

Well-known member
Joined
Jan 20, 2006
Messages
3,853
There is usually a spring on the bolt that holds the lever to the chassis. You should be able to tighten it a touch to fix that problem.
Hopefully its the same as other models.
Snug up the 2 3/8 bolts that hold the lever to the frame. Worse case you may need to put some kinda shim in there.
ken
 

Fishfiles

Well-known member
Joined
Feb 8, 2007
Messages
1,698
Snug up the 2 3/8 bolts that hold the lever to the frame. Worse case you may need to put some kinda shim in there.
ken
If tightening up the allen head screws don't do it , there are 3 metal wavey spring washers and a fiber washer that need to be replaced behind the allen headed screws and throttle arm , if it is all rusted around the throttle , this would probally be the case
 
Top