gehlnewbie
Member
- Joined
- Jun 9, 2012
- Messages
- 5
Hey All, Long story...GEHL with Deutz diesel engine that hadn't been started in 2 years due to idiot operators causing much damage which was partially repaired by a local shop before they went under. The oil pan (new) and crankshaft (used) were replaced and I was able to finish putting the engine back together. After a lot of work I got it to run but it abruptly quit after a few minutes. At this point it won't turn over. The starter clicks but nothing. I took the starter out and verified that it was turning. I removed the radiator and took off the fan blade and put a ratchet/socket and breaker bar on the large bolt holding on the bottom pulley. I couldn't get it to turn at all. The fan does turn by hand. The battery has been charged and all cables cleaned, including the connection on the starter solenoid. Any thoughts/ideas? Thanks!