universal mounting plate dimensions??

Help Support SkidSteer Forum:

vinrum

Active member
Joined
Dec 27, 2006
Messages
39
I am planning on making a few plates to mount my farm implements to..Does anyone know the dimensions of the universal plate with the top angle and hole locations??..Is there a site that has a blueprint on the plate?? Please let me know..
Steve
 

sterlclan

Well-known member
Joined
May 1, 2004
Messages
528
There is some information here I measured my bucket and copied that if you need measurements let us know Jeff http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=2887
 

refuse2

New member
Joined
Jan 17, 2007
Messages
4
How far off the ground should the q-tach adapter be I put one on mine not too long ago and I think it is to low?
 

skidsteer.ca

Well-known member
Joined
Jan 20, 2006
Messages
3,853
How far off the ground should the q-tach adapter be I put one on mine not too long ago and I think it is to low?
It should be set up so the bucket is flat on the ground when the boom is fully lowered.
However if you run tracks or taller tire it is different, and also for various loaders it changes.
www.perhammachine.com sells these QA plates for $78.00 which is fairly resonable
Ken
 
Top