Source of after market or used rims

[Stephend]

I have a Bobcat 751 skid steer with foam filled tires. The tires are worn out with no hope of recapping. I was thinking in the long run it might be easier to replace the rim rather than cut the foam fill tires off the rim. Therefore, I am looking for used or after market rims. Thank you in advance for any suggestions or resources.

 

[sledesigns]

For new wheels Gemplers.com is my backup plan. For tire & foam removal maybe the foam fillers have some type of aggressive tire lathe. Have them whittle the tires off for a few bucks? Good Luck -Scott

 

[jeffco]

For new wheels Gemplers.com is my backup plan. For tire & foam removal maybe the foam fillers have some type of aggressive tire lathe. Have them whittle the tires off for a few bucks? Good Luck -Scott

Chicago tire inc has 12.00 X 16.5 wheels for about 90.00 each. Do a search on e bay for skid steer wheels and tires, several wheel/tire combinations for a little over 1200.00, seems like a good price but who knows the quality. Good luck, jeffco

 

[gabem1]

Chicago tire inc has 12.00 X 16.5 wheels for about 90.00 each. Do a search on e bay for skid steer wheels and tires, several wheel/tire combinations for a little over 1200.00, seems like a good price but who knows the quality. Good luck, jeffco

taylor northeast I Thought had the tel. its at the shop located in Pa.They have solid rubber tires with throw away wheels also have regular 12.6.5 or 10 6.5 really nice maple leaf tread wears well. There is an other place for just steel wheels I'll get the info and post it

 

[gabem1]

taylor northeast I Thought had the tel. its at the shop located in Pa.They have solid rubber tires with throw away wheels also have regular 12.6.5 or 10 6.5 really nice maple leaf tread wears well. There is an other place for just steel wheels I'll get the info and post it

Sorry the size 10 and 12 16.5