rebuilding a drive motor

[patrickg]

I took a drive motor off my skidsteer and took it to a hydraulics shop to get it fixed. They said that I should just buy a new one from them. Is it impossible for me to rebuild it myself. I am mechanically inclined and I can get a machine shop to do the things I can't do myself. I am trying to get my machine up and running again as cheaply as I can. Things are pretty tight right now and paying over 1000 dollars for a new drive motor is going to hurt. The skidsteer worked, but one side was a little bit slow. I have a local parts place called Motion Industries and I imagine they can get me any part I will need. I am open to suggestions and I appreciate any advice.

 

[Tazza]

Check your other post.
Please in future if you don't post something in the rite area just say something and we can move it, saves starting a new thread.

 

[patrickg]

Check your other post.
Please in future if you don't post something in the rite area just say something and we can move it, saves starting a new thread.

Sorry about that, but thanks!

 

[Tazza]

Sorry about that, but thanks!

Not an issue, thats why i wasn't winging about it