M matthause Member Joined Feb 5, 2012 Messages 14 Feb 11, 2012 #2 I removed the two set screws on the primary variable sheeve clutch i got it to come off 1/2 inch. Is anything else holding this on? I am about to use a come a long but need to know if anything else is holding this on. Thanks.
I removed the two set screws on the primary variable sheeve clutch i got it to come off 1/2 inch. Is anything else holding this on? I am about to use a come a long but need to know if anything else is holding this on. Thanks.
OP OP M matthause Member Joined Feb 5, 2012 Messages 14 Feb 12, 2012 #3 Figured it out, there is a set screw under a set screw on one of the holes.
