thalos2688
New member
- Joined
- Mar 11, 2024
- Messages
- 3
I have a Bobcat S66 skid steer with 24 hours of use, about six months old. It was working fine until two days of heavy rain while it was left outside. Now, I'm getting communication failure errors, including:
U1095-08: Workgroup. Controller No Communication
U1093-08: Mid Controller No Communication
U1094-08: Drive Controller No Communication
U1185-00: Radio No Communication
Machine is Limited Due to Low Hydraulic
I've seen videos about moisture in connection receptacles. I unplugged everything, dried it, and used compressed air, but I still have a work group controller connection error. I've checked the ground wires and battery terminals.
The nearest Bobcat dealer is 3 hours away, so I'd like to resolve this myself.
Has anyone else encountered this issue? Any troubleshooting advice would be greatly appreciated!
U1095-08: Workgroup. Controller No Communication
U1093-08: Mid Controller No Communication
U1094-08: Drive Controller No Communication
U1185-00: Radio No Communication
Machine is Limited Due to Low Hydraulic
I've seen videos about moisture in connection receptacles. I unplugged everything, dried it, and used compressed air, but I still have a work group controller connection error. I've checked the ground wires and battery terminals.
The nearest Bobcat dealer is 3 hours away, so I'd like to resolve this myself.
Has anyone else encountered this issue? Any troubleshooting advice would be greatly appreciated!
