Hi everyone, In my continuing quest to get aux hydraulics plumbed on my 825, I decided to ask those on the forum for a little help. I would like to keep it as original as possible. The previous suggestion I received about simply running hose to the front certainly is doable, but if possible I'd like to do the hard tube route. I am listing the part numbers of the parts and also the original conversion kit number. The next time a member of the forum visits their local bobcat store ask the parts guy if they happen to have any of the part numbers listed below. You never know what you may find… I was recently in Salt lake City Utah, and while there I dropped by the Bobcat store. They didn't have the tubes I was looking for, but they did have an indicator light that had been long discontinued by Bobcat that I needed. Here are the numbers: 6543000 -- Tube 6543001 -- Tube 6553435 -- Tube 6553436 -- Tube 6553491 -- Aux Hyd Kit I know it is a real long shot, but I would appreciate anything anyone would do. thanks Steve A.