Dieselrider
Member
- Joined
- Jul 30, 2011
- Messages
- 12
I replaced the seat switch with the broken terminal. So this is related but different.When I first set in the seat all the panel lights light as they should and then the park brake light flashes. However, when I connect the seat belt the park brake light continues to flash. (I checked the seat belt switch with an ohm meter and it appears to work properly every time.) If I turn the key to run the park brake light stops blinking as it should. Now if I turn the key to start, the light will blink again and the skid steer will not start. If the seat belt switch is actually closing as it should, what else in the circuit could be causing the trouble? Any ideas? Thanks