Dieselrider
Member
- Joined
- Jul 30, 2011
- Messages
- 12
I have an LX 665 that has always seeped a bit of oil but the other day it was leaving a stream as I hauled some shale . Not a main hose that I can see up top but somewhere underneath. I have the seat up and the hydraulic pump exposed and can see most of the lines and such but, cannot tell where it is leaking. Could be a loose fitting, a bad line or a seal in the pump but I can't see it. If I put it back together to run it and work it I won't be able to see where either. Are there any places that this model is known to leak or should I just start pulling everything until I get under the pumps? There is a small belly plate under the pump but, very limited access to anything. Wonder why they wouldn't make a larger belly pan that could be removed?