LS190 bucket removal

[Jakejack96]

Hello all, I'm new to the skid steer game so please be kind haha, I have a new holland LS190 and it has hydraulics to change attachments and I cannot figure out for the life of me how they work. There is a little button on the right hand control that you can flip side to side and the handle also moves side to side. When I move the handle the hoses to the bucket move but I can't get the bucket to release. Any help with that is appreciated. Thanks!

 

[Mike10]

Depending on the year of mfg, there will be a switch next to the light switch or on later models the switch is located above your left shoulder. There should be symbols on the switch representing the bucket. Depress and hold the switch while at the same time curl the bucket all the way back and continue to hold the pedal deadheading the hydraulics. If the bucket does not unlatch press the switch the other way. The bucket circuit provides the oil to operate the latching cylinder, but pressure needs to build in the system, that is why you deadhead the hydraulics.

 

[Jakejack96]

Depending on the year of mfg, there will be a switch next to the light switch or on later models the switch is located above your left shoulder. There should be symbols on the switch representing the bucket. Depress and hold the switch while at the same time curl the bucket all the way back and continue to hold the pedal deadheading the hydraulics. If the bucket does not unlatch press the switch the other way. The bucket circuit provides the oil to operate the latching cylinder, but pressure needs to build in the system, that is why you deadhead the hydraulics.

Thanks for the reply!! I'll be around the skid later this afternoon and I'll see what I can do. Once again thank you!