Jerking bad?

Help Support SkidSteer Forum:

marco93l

Member
Joined
Mar 6, 2015
Messages
13
What could possibly cause a bobcat to suddenly start jerking, the only way to stop it is to stop moving the loader forward and start to move it slowly. I noticed it doing this a few times before the motor went south. The jerking was pretty violent.???? I have the motor out now and wasn't sure if I should get the pump cleaned, rebuilt, or replaced. (Providing that could even be the problem) Thanks again everyone for the input. This bobcat is new to me and I like to know as much as I can about equipment that I use.
 
Loose pintal levers. Aluminum arms that link the steering linkage to the shafts on top of the hydrostatic pump.
 
Loose pintal levers. Aluminum arms that link the steering linkage to the shafts on top of the hydrostatic pump.
Thanks. I lifted it up and I did notice that one of them was loose and almost hanging. I am going to replace the alum pivit and a bushing. I hope this will help. Thanks greatly. It is most appreciated!
 

Latest posts

Top