Gehl 2600 Hydro trans?

[wells 700]

I have a Gehl 2600 skid steer and I was wondering if someone had any info on who made the hydrostatic transmissions for this unit? I haven't had much luck finding info or a good place for used parts on this machine. Thanks Al

 

[Tazza]

Can you lift the cab and look for a tag? somewhere there should be a plate telling you what brand and model it is.

 

[wells 700]

Can you lift the cab and look for a tag? somewhere there should be a plate telling you what brand and model it is.

I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al

 

[Tazza]

I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al

Send Levi an e-mail from http://www.skidloaderpumps.com/ he has parts or can get parts for just about anything. Look up his details in the contact info section lower down on the first page.

 

[stevestud99]

Send Levi an e-mail from http://www.skidloaderpumps.com/ he has parts or can get parts for just about anything. Look up his details in the contact info section lower down on the first page.

the one on my gehl 2600 are mde by sunstrandt i believe cost about 2800.00 to have my one rebuilt.

 

[Gehl-2500]

the one on my gehl 2600 are mde by sunstrandt i believe cost about 2800.00 to have my one rebuilt.

My 2500 had one made by Hydra mac in Minnesota. They went out of business and a guy named John Bugge who used to work there bought all the spare parts and prints. I have talked to him about parts for my 2500. His number is 218-684-5901. The Tech help at Gehl didn't even know this... I just walked my way through the story of hydra Mac until I found John. Mike

 

[stevestud99]

I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al

did you ever find out who made these drive motors and can you buy replacements for these older gehls 2600s

 

[Gehl2600helper]

Have a 2600 have had both of my hydro repbuilt. One cost me 742.00 just seals and cleaning that was done locally. The other a total rebuilt 724.00 by Quality Hydro, in wisconsin and I had to ship it there.

 

[70Gehl2500]

I had a gehl 2500, the hydrostats were built by sunstrand. You can find parts for them on golden eagle direct . Com

 

[Dfischer]

looking for a hydrostatic disc or older 2600 gehlskid loader should be rubber disc about an inch wide . the part number i found is 062033 which isnt the right one . does anyone know where to find the right disc.