Gehl 2600 Hydro trans?

Help Support SkidSteer Forum:

wells 700

New member
Joined
Aug 28, 2008
Messages
2
I have a Gehl 2600 skid steer and I was wondering if someone had any info on who made the hydrostatic transmissions for this unit? I haven't had much luck finding info or a good place for used parts on this machine. Thanks Al
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
Can you lift the cab and look for a tag? somewhere there should be a plate telling you what brand and model it is.
 
OP
OP
W

wells 700

New member
Joined
Aug 28, 2008
Messages
2
Can you lift the cab and look for a tag? somewhere there should be a plate telling you what brand and model it is.
I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al
Send Levi an e-mail from http://www.skidloaderpumps.com/ he has parts or can get parts for just about anything. Look up his details in the contact info section lower down on the first page.
 

stevestud99

Member
Joined
Sep 9, 2009
Messages
7
Send Levi an e-mail from http://www.skidloaderpumps.com/ he has parts or can get parts for just about anything. Look up his details in the contact info section lower down on the first page.
the one on my gehl 2600 are mde by sunstrandt i believe cost about 2800.00 to have my one rebuilt.
 

Gehl-2500

Member
Joined
Sep 29, 2009
Messages
8
the one on my gehl 2600 are mde by sunstrandt i believe cost about 2800.00 to have my one rebuilt.
My 2500 had one made by Hydra mac in Minnesota. They went out of business and a guy named John Bugge who used to work there bought all the spare parts and prints. I have talked to him about parts for my 2500. His number is 218-684-5901. The Tech help at Gehl didn't even know this... I just walked my way through the story of hydra Mac until I found John. Mike
 

stevestud99

Member
Joined
Sep 9, 2009
Messages
7
I have both hydrostatic transmissions out of the unit and the tag only list patent #, and a #05 ML 15481,and 90 1095 LH,and no name as to who made the transmission. Maybe Gehl made them but I don't believe so . Thanks Al
did you ever find out who made these drive motors and can you buy replacements for these older gehls 2600s
 
Joined
Apr 15, 2013
Messages
12
Have a 2600 have had both of my hydro repbuilt. One cost me 742.00 just seals and cleaning that was done locally. The other a total rebuilt 724.00 by Quality Hydro, in wisconsin and I had to ship it there.
 

70Gehl2500

New member
Joined
Jun 7, 2022
Messages
1
I had a gehl 2500, the hydrostats were built by sunstrand. You can find parts for them on golden eagle direct . Com
 

Dfischer

New member
Joined
Oct 29, 2022
Messages
1
looking for a hydrostatic disc or older 2600 gehlskid loader should be rubber disc about an inch wide . the part number i found is 062033 which isnt the right one . does anyone know where to find the right disc.
 
Top