fuel problem

[Fishfiles]

I seen a different fuel problem yesterday , 323 bobcat hoe with 450 hours , wouldn't run , fuel squirtig out #1 injector only , none from 2 or 3 , pulled the injector pump and 4 screws had fallen out the plate over the sliding throttle rod , found 3 or the 4 with a magnet in the bottom of the injection cam housing , drained the oil , attached a magnet to a piece of mig wire and put it thru the oil drain fitting and fished the 4th out , put it all back together with locktite and it works , wonder it this is going to become a trend

 

[Butters]

What engine does that one have?
Do you think it was fuel related or poor workmanship?

 

[Fishfiles]

What engine does that one have?
Do you think it was fuel related or poor workmanship?

It has a 3 cylinder , the newer design , didn't pay attention to the model number , had to be workmanship , either or both , screws was not tight enough or they didn't locktite it , that pump is the same style set up used on all of the kabota's , I have never seen or heard of this problem before , the way it is sandwiched in , when the bolts fell out the plate couldn't as the throttle linkage held it in , so full travel of the rod was not achieved and only one was shooting fuel -----------