Ford CL-20 pump repair

[tjhummer]

Hello all. I have a Ford CL-20 with a broken cam plate stud on one of the drive pumps. I want to get this welded, but I don't want to take this on until I find a source of parts, if necessary, and especially a gasket and seal set. Does anyone have any idea where I can obtain these parts? Thanks

 

[Luckyperk47]

This is an answer to an old post on the pump repair on the Ford CL 20. 70142, 70144 and 70145 Cessna Eaton piston pump is the Hydrostatic piston pump that is in my CL20. At the following web address is the PDF parts schematic for this tranny. http://www.vickers.sh.cn/pdfs/06-632.pdf Texas Bearing In Amarillo was familiar with Cessna Eaton hydraulic pumps. I ordered parts from them. This same hydrostatic transmission is in several models of skid loaders, Erickson, Case 1830, New Holland, are a few of them.

 

[Daniel Skorupa]

Hello all. I have a Ford CL-20 with a broken cam plate stud on one of the drive pumps. I want to get this welded, but I don't want to take this on until I find a source of parts, if necessary, and especially a gasket and seal set. Does anyone have any idea where I can obtain these parts? Thanks

Eaton Danfoss 70111-3000 Hydraulic Piston Pump Motor PN: 70142 RES E931104GD I
If you or someone you know need a new in the box pump. Let me know

 

[Brandon Orr]

Eaton Danfoss 70111-3000 Hydraulic Piston Pump Motor PN: 70142 RES E931104GD I
If you or someone you know need a new in the box pump. Let me know

Daniel I am interested in this. is this a direct replacement?