Just got my bobcat running again after putting in a new head gasket and some other goodies. I got it started ran for about 20 minutes ran pretty good then it lost power and quit. It stated right up and died again. I am thinking it's a fuel problem it did not get hot before it shut off 180 degrees was all far from the 220 I had it set at. So anybody have any ideas what might be going on.
Help Support SkidSteer Forum:
- Joined
- Jun 1, 2012
- Messages
- 1,505
You may want to post what model Bobcat you have.
If it is diesel, the first thing I would look for is air in the fuel lines. The pickup tube could be shot and sucking air when the fuel gets to a certain level.
If it is diesel, the first thing I would look for is air in the fuel lines. The pickup tube could be shot and sucking air when the fuel gets to a certain level.
