Getting a replacement engine for the bobcat. I have removed the flywheel and cover. Everything up front and accessories. Removed two bolts underneath but the engine is still tight. I can tell there is still a bolt or two somewhere holding it in place but I can't find anything. I have a 773 I looked everywhere online and couldn't find much at all. Is there a manual or something that will show me where the bolts are so that I can get the engine out? Thanks for the help!
Help Support SkidSteer Forum:
I always buy the service manual for my equipment. I go to eBay or the dealer.
Yes, I have all the brackets removed and lower bolts and the flywheel stuff to the case. It is still in there tight, so I know I missed something in there. I am going to see if I can find anything online real fast and download it so that I can look into it again this evening. Thanks
OldMachinist
Well-known member
- Joined
- May 24, 2006
- Messages
- 2,748
Like Dan said the engine and pumps come out as an assembly.
Maybe you could try the Bobcat on line parts book and see if you can see what is holding it in. http://bobcatpartsonline.com/bobcat/mainPage.jsp?home=yes&isF11=true&tocStatus=0
If I remember correctly, there are dowel pins between the engine and flywheel housing.
