Engine Fuse Blown. Please Help

Help Support SkidSteer Forum:

Butters

Well-known member
Joined
Jan 23, 2007
Messages
72
Was trying out the new stump bucket this evening. I went to make a left turn and everyting just stopped, engine, gauges etc. I looked around and the engine fuse was blown. I replaced it and soon as I turned the key, it popped again. Where in the heck to I start looking for the short? It got dark. I would like to fix this without having to call Bobcat field service.
Any thoughts would be greatly appreciated.
 

farmboy55

Well-known member
Joined
Aug 16, 2006
Messages
324
It sounds like the short was just created and you can do the same thing your man frm Bobcat is going to do. Just start looking for the short. Have you did any work on the machine lately? If so, that area may be a good starting point. good luck dennis
 
OP
OP
B

Butters

Well-known member
Joined
Jan 23, 2007
Messages
72
It sounds like the short was just created and you can do the same thing your man frm Bobcat is going to do. Just start looking for the short. Have you did any work on the machine lately? If so, that area may be a good starting point. good luck dennis
It was the hour meter shorting out.
 

Latest posts

Top