Deere CT322

[ruko_ruko]

Hello Looking at a 2008 with 3600 hours on the meter. It has AC/heat, 15.8 in tracks, aux hi flow hydraulics and very clean looking outside. Might have been repainted. Says every thing works. Asking 21,995 or best. Is 3600 hours excessive? When do these things start to break on average? Thanks

 

[Tazza]

It really depends on if it was looked after. You can wear out a machine in 1,000 hours if you never grease it and run it in a harsh environment.
You said it looks good, i'd make sure the pivot points are tight, ir at least, not too sloppy.
Diesel engines generally do at least 6,000 hours till they start to wear out. But again, this depends on if it was taken care of. There have been members on here with machines with 9k hours and still running strong.

 

[ruko_ruko]

It really depends on if it was looked after. You can wear out a machine in 1,000 hours if you never grease it and run it in a harsh environment.
You said it looks good, i'd make sure the pivot points are tight, ir at least, not too sloppy.
Diesel engines generally do at least 6,000 hours till they start to wear out. But again, this depends on if it was taken care of. There have been members on here with machines with 9k hours and still running strong.

Thanks Does the price of $21,999 seem reasonable? Thanks

 

[Tazza]

Thanks Does the price of $21,999 seem reasonable? Thanks

To me, the price seems a bit high, but i don't know what they usually go for in your area.
Hopefully someone can give a better reply, i'm from .au so our prices are generally higher, and i know i wouldn't pay that much over here.

 

[beemmeup32]

To me, the price seems a bit high, but i don't know what they usually go for in your area.
Hopefully someone can give a better reply, i'm from .au so our prices are generally higher, and i know i wouldn't pay that much over here.

up in new england they are generally 17-20K with those hours, heat, AC, high flow, and decent tread left on tracks. not over 20k though