CT332 Final drive Cover plate removal??? Please Help!

[DeereFan332]

Hello, I have an o ring leaking behind the cover plate on the final drive for my CT332. I have the cover plate Retainer clip removed but cannot for the life of me figure out how to remove the cover plate. Any help would be appreciated. Thank so much in advance!!

 

[bucketboy]

DeereFan, I recently removed mine by unscrewing the hex bolts part way out and then using a pair needle nose to gently pry it off. Also, I found it helpful to tap all around the cover with hammer to loosen the plate. Keep in mind when you do get it off, you will need some heavy silicone to hold the o ring in place to get it put back together if the drive is still on the machine and not setting on a work bench. Hope this helps.