Check out my new skid steer mirrors!

Help Support SkidSteer Forum:

cchardwick

Well-known member
Joined
Jan 25, 2007
Messages
52
On another post I was talking about putting some mirrors on my bobcat for loading onto a trailer. I finally came up with a simple cheap design that works great. I'm posting so you can get some ideas and copy it if you want. Here's the link, Enjoy! http://www.capsandstems.com/ed/bobcat_mirrors.htm
 

nobull1

Well-known member
Joined
Jan 4, 2007
Messages
196
Looks good, and appears to have real good vision behind. Another week or two and I will be out fooling around on my machine, to do the same. I wouldn't be surprised that I have something quite similar to yours.
 

cchardwick

Well-known member
Joined
Jan 25, 2007
Messages
52
Looks good, and appears to have real good vision behind. Another week or two and I will be out fooling around on my machine, to do the same. I wouldn't be surprised that I have something quite similar to yours.
I was going to weld something up and even had the angle iron cut until I realized that I could make it without any welding at all. Works great and I can even lift a load several feet off the ground and drive around with a good view in the mirrors.
 
Top