Bobcat M610 Hydraulic cylinder seal replacement

[dadsbobcat]

I am looking to replace the hydraulic cylinder seals in a 1972 Bobcat M610 with a Wisconsin motor VH4D engine in it. Does anyone have any part numbers for the seals and do all 4 cylinders take the same seals? Thanks any help is certainly appreciated.

 

[6brnorma]

Seals are not the same. Bobcat lift cylinder seal kit is pt #6803329 and for the tilt cylinder it is pt #6803472. I am far from a hydraulic expert but I never buy the Bobcat kits…..too rich for my blood, so I take the seals to a hydraulic shop and buy them individually. It has been quite a while since I have priced them so it may be different now. Others may have much better advice then mine.

 

[mark18mwm]

In the past I have ordered seal kits from a place called Baum hydraulics, always been happy with the service, price and quality. Here is a link to their agriculture catalog (that is where they put Bobcats) https://www.baumhydraulics.com/files/catalog/sec-x.pdf. Lift Cylinder .... bore 2.0 ....rod 1.25 part number 6504959 ... sequence number G00450...ea.$9.69; Tilt Cylinder ... bore 2.0 ....rod 1.0 part number 6504960....sequence numbe G00455...ea$ 6.74 ; Here is a link to their home page https://www.baumhydraulics.com/pages.php?pageid=67 And their phone number is (that's how I order) 800-228-9222 I hope this might help you.

 

[mark18mwm]

In the past I have ordered seal kits from a place called Baum hydraulics, always been happy with the service, price and quality. Here is a link to their agriculture catalog (that is where they put Bobcats) https://www.baumhydraulics.com/files/catalog/sec-x.pdf. Lift Cylinder .... bore 2.0 ....rod 1.25 part number 6504959 ... sequence number G00450...ea.$9.69; Tilt Cylinder ... bore 2.0 ....rod 1.0 part number 6504960....sequence numbe G00455...ea$ 6.74 ; Here is a link to their home page https://www.baumhydraulics.com/pages.php?pageid=67 And their phone number is (that's how I order) 800-228-9222 I hope this might help you.

If you go to the Baum catalog, you will have to "copy and paste" the web address, I can't seem to post any links you can just click on. To get to the bobcat section, scroll down a little way and you will see the info (size,type etc.) on those seals that would help you if you buy them at a local hydraulic shop before you take the cyl's apart.

 

[6brnorma]

If you go to the Baum catalog, you will have to "copy and paste" the web address, I can't seem to post any links you can just click on. To get to the bobcat section, scroll down a little way and you will see the info (size,type etc.) on those seals that would help you if you buy them at a local hydraulic shop before you take the cyl's apart.

Great site Mark……thanks