A 300 Electrical Issues

[aknome]

New to Me A300 arrived on barge. Problem 1. No harness to run snowblower. Dealer is sending 14 pin harness. How difficult is this to install? Problem 2. Low battery charge. 3 beeps while operating. Discovered blown fuse for alternator. What would cause that? Problem 3. Wiper/washer doesn't work. Suggestions? Thanks in advance.

 

[Bobcatdan]

Problem one, unless it is an old snowblower, you need a 7 pin to run a newer bobcat snowblower. 7 and 14 pin harness plug into the same spot, roung plug above battery, plug in, done. 14 pins on newer machines need a controller to run, all part of 14 pin kit and just as easy to install. As for your other problems, is or was there smashed 7 pin harness on the machine, that will blow the ALT & KIT fuse. After changing the fuse does it charge now. Do the wipers work now after changing the fues? I'm pretty sure they are protech by the same fuse.

 

[aknome]

Problem one, unless it is an old snowblower, you need a 7 pin to run a newer bobcat snowblower. 7 and 14 pin harness plug into the same spot, roung plug above battery, plug in, done. 14 pins on newer machines need a controller to run, all part of 14 pin kit and just as easy to install. As for your other problems, is or was there smashed 7 pin harness on the machine, that will blow the ALT & KIT fuse. After changing the fuse does it charge now. Do the wipers work now after changing the fues? I'm pretty sure they are protech by the same fuse.

Wipers work and it is now charging after new fuse. Snow blower is brand new; had it wired for 14 pin since that's what the dealer said machine had. But no harness at all; that's why he's sending me a 14 pin harness. Thanks for the reply.