Hi, My tilt Cylinder is leaking. Does anyone know the seal and O ring sizes to rebuild this cylinder? OR will I have to drag this thing to a hydraulic shop to match them up? Also the traction lock solenoid is not always pulling up. Is this commonly just the solenoid? is the the problem commonly something else?
863F Tilt Cylinder Leak And Traction lock problems
- Thread starter Zerotact
- Start date
flyerdan
Well-known member
- Joined
- Mar 7, 2009
- Messages
- 983
A hydraulic shop should be able to look up the parts without having to see it. If you want to source them yourself there is an 863 parts book in the manual thread or you can find the numbers at Bobcat Parts Online and search online vendors.
As for the traction lock, any time something electrical is acting up, first suspect the connections, make sure they are all clean and snug. If that all looks good, there could be a burr or nick that causes it to act up sometime. Hopefully someone will be along shortly with an experienced opinion.
As for the traction lock, any time something electrical is acting up, first suspect the connections, make sure they are all clean and snug. If that all looks good, there could be a burr or nick that causes it to act up sometime. Hopefully someone will be along shortly with an experienced opinion.
Latest posts
-
743B Drive Motor, O-Ring breakdown, Disappearing - Hydraulic Oil?- Latest: 123ignitionusa
-
-
-
-
-
-
-
-
-
-
-
