853 jerky going forward

Help Support SkidSteer Forum:

ryunker

New member
Joined
Feb 13, 2008
Messages
3
I have looked thru all of the skid steer forum and did not locate anybody having issues with jerks in going straight forword? We would like to work this in house, but I need to know if it is major or not... I did read about "Swash Plates" any body know how to get to them for inspection? Please help.
 

OldMachinist

Well-known member
Joined
May 24, 2006
Messages
2,748
Yes, just in forward motion turns seems to be fine.
The first place I'd look is the replenishing valves for the forward side of the hydrostatic pump. These look like large bolt heads on the pump. There are spring loaded valves under these bolts.
 
OP
OP
R

ryunker

New member
Joined
Feb 13, 2008
Messages
3
The first place I'd look is the replenishing valves for the forward side of the hydrostatic pump. These look like large bolt heads on the pump. There are spring loaded valves under these bolts.
Thank you, it sounds as is we can fix this in house, Rich
 
Top