743b blowing fuse on start up

Help Support SkidSteer Forum:

BJ

New member
Joined
Apr 22, 2013
Messages
2
I have a 743b that blows the fuse after the engine starts and the key released. I have replaced the starter as it was dragging, but still have the same problem. Any thoughts?
 
something is shorting out, could be hour meter, lights, bad ground. anything that comes on with the key
Try disconnecting the engine stop solenoid on the engine. Pull the lever back and hold it in place with a cable tie, try starting it and see if the fuse goes again. If it doesn't, the solenoid is shorted.
 
Top