mkueffler
Well-known member
- Joined
- Feb 14, 2009
- Messages
- 57
after fixing the u-joint problem between the motor and the pump, I have a fuse that keeps blowing instantly. I have checked for a short somewhere and have double checked that all electrical was put back where it came from during the u-joint fix. this fuse works with the three gauges on the right side of the cab. I turn the key to on and the fuse blows instantly. then there is times it will wait until I start cranking over the engine. currently for a quick fix so I can run the machine, I have replaced the fuse holder with a toggle switch. I turn on the toggle switch long enough to start the machine and then turn it off. of course I don't have any gauges that work doing this.