snowtractor
Member
- Joined
- Feb 1, 2012
- Messages
- 18
How do u get the yoke lined up when Instaling engine
Thanks for the help I got it it sucked but it's doneThat's the fun part.
The way i do it is to get the engine installed in the engine bay, the back of the engine just sits inside the engine bay or it sits on the ledge of the engine bay.
Get a helper with a bar to SLOWLY bump it forward while you lay on the pump and hold the yoke up. Make sure you keep your fingers out of the space between it and the spline on the pump or you rick maiming your fingers.
It's really not hard to do as long as you have a helper.
another trick is a come along, you can put right hand on joint, left hand on comealong. works when by youreself,Thanks for the help I got it it sucked but it's done