743, 741 lift arm

[bilingbookworm]

Looking for parts for a 743 or 741 need lift arm and other parts

 

[Tazza]

Talk to Mike, he has an add here:
http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=35016

 

[langoley]

Talk to Mike, he has an add here:
http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=35016

Tazza,would 642 arms and cylinders be the same as on a 743?

 

[Tazza]

Tazza,would 642 arms and cylinders be the same as on a 743?

I honestly don't know, i thought the frame size was the same or very close to a 743. It depends on the vintage of the machine too. Some had slightly longer lift rams so the bosses did not line up with the rams. You will need to get someone to measure the width and distance from the top pivot point to the one that the lift ram attaches to. I remember having this issue when i was looking for a set of arms, a mate has a set, but the distance was different, they were off a 743, just a different vintage one.
Sorry i can't give you a yes or no here.

 

[langoley]

I honestly don't know, i thought the frame size was the same or very close to a 743. It depends on the vintage of the machine too. Some had slightly longer lift rams so the bosses did not line up with the rams. You will need to get someone to measure the width and distance from the top pivot point to the one that the lift ram attaches to. I remember having this issue when i was looking for a set of arms, a mate has a set, but the distance was different, they were off a 743, just a different vintage one.
Sorry i can't give you a yes or no here.

If he doesn't have a set yet, I can measure these,they are off a late model 642.