533 tilt wont stay up

[elmanion1976]

Have rebuilt the tilt hydraulic but it still drops down. Any ideas what to do

 

[solo machine]

The problem might be a bad seal in the valve body.

 

[cdmccul]

Needs half a Bobcat-Viagra.

No no no. I mean valve body issues.

Yea, it could be the cylinder itself, but if it still sags, it's gotta be in the valves.

 

[elmanion1976]

Thank you

 

[elmanion1976]

Yet another issue with this darn machine. All of a sudden while using the machine today, The front wheels came up off the ground while driving forward and upon parking the left side front wheel stayed off the ground.

Any help would be greatly appreciated.

 

[brdgbldr]

Yet another issue with this darn machine. All of a sudden while using the machine today, The front wheels came up off the ground while driving forward and upon parking the left side front wheel stayed off the ground.

Any help would be greatly appreciated.

You had better check the axle tube to see if it is bent or broken.

 

[oiu789]

Both wheels at the same time? Is the weight on the bucket? Sounds like hyd control issues ie valves solenoids electrical wiring.