the thing about led is more light with less amp draw over halogen lights,so unless you go really wild, leds should not need a extra circuit if the halogen are removed. what you could do if you want the orginal connectors to be used is to solder and heat shrink the old connectors to the new pigtails of the new lights.
Thanks for the response. I did fail to mention the skid didn't have lights when I bought it… no idea why.
Can anyone recommend a brand/model of leds?
I would look for lights that first put out the light that you need but are not so large that they will stick out anywhere where they could get torn off. as a rule leds are smaller than halogen and make less heat so try to tuck them in where the factory ones would have been if possible. On the machine I used to have had no lights I added the ones from northern tool about 2.5 inches square ,provided good amount of light on sale I think 30 bucks for 2 but that was a few years ago before biden happened. there are alot of choices out there ,shop around and find the best fit.
I upgraded mine because the LEDs are brighter, use less power, and last longer.
Thanks for your reply
