Thanks for the comments! What do you think of gearbox units compared to direct drive as far as lastability? Also which one would cut the heavier brush. I will check those cutters out and appreciate all the replies!
My 1845C did this a few weeks ago and it turned out to be the in line fuse in the red wire in the engine compartment behind the seat. It had some corrosion in the fuse and after it was cleaned up and put back in, it worked great. Tom
I cannot blow back through the line into the tank. I took the line loose by the primer bulb and took a air hose and cannot get anything to blow back through from what I can tell. I do have winter fuel in it with some treatment. I think they did not have it treated right or I had some water in...
We hit 0 degrees F. today and I gelled or froze my diesel fuel line on my 753 Bobcat. I put in power service before I started it. It ran for about 20 minutes and quit. I put in some ISO HEAT and still nothing. I took the line loose at the primer bulb and am not getting any fuel out except a seep...
RobPG1967, I have a 753 Bobcat with over 4200 hrs. on it. Mine was starting a little hard and I checked the glow plugs and they seemed Ok. The next step I took was to remove the injectors and had them rebuilt. They were extremely worn and it seemed to make a big difference in starting and the...
I am out here in Idaho. Sounds good on starting up a business. How about a name like: SkidMate Attachments Just a thought Did you come up with a good tree shear attachment? Tom
I am looking for a bobtach for my 753. Mine is really worn and needing new bushings etc. and will take quite a bit of rebuilding. If I could find a reasonable one out there that would work, I would be interested in purchasing one.
Good pictures! I had my 753 Bobcat smoking a bit and I pulled all the injectors and had them rebuilt at an injector rebuild place. They said they never saw such worn injectors and said it was a good idea to get them rebuilt. Seems like it was around $300 to totally rebuild them. It sounds much...
Anyone have any good ideas on building or have built a hydraulic tree shears? I am wanting to build one that will cut up to about an 8 inch tree. I am planning on running it with a 753 Bobcat. Give me so ideas!!!!!!!!!!!!!!!!!!!!! Tom