Recent content by toohp

Hi I no longer own a bobcat or machinery now or have so for years can I have all my account details removed please ?

wonder if there same offset ?

Does anybody know if wheels off a 763 fit a Bobcat s130 ?? so far looks like the s130 have a deeper inside offset ?? Would the stud pattern be the same ? Cheers

Where you located I may have one coming up ?

Ok so my old 763 is finally giving me signs something major is on the way out but which is it ?its done 8000 hrs approx It's started to growl when turning its become slower in turning and dosn't appear strong but Im not pushing it now Im just taking nice slow wider turns to keep it going . I...

Will be parting out my 763 Hi Flow in australia soon if any body's Interested in any parts . Let me know if there's anything you need ? Located Melbourne Australia

If anybody s Interested I will have bobcat 763 parts available soon . Machine located Vic / Aust . contact me on [email protected]

Update . Problem solved - Faulty Diode Module part no 6664 388

Ok , I got a electrician out again the other day to try and fix this problem . But no good looks like the problem is in either the PWm module or the smaller other diode module , problem lies with which one do I replace the pwm is $900 Inc or the smaller one is $400 Inc or do I do both $1300 ...

So Ive thrown more $ at it and still havn't been able to fix it but we have now found out its electrical !! One problem was its a high flow so we were working on the wrong valve bank . Ok Ive got power from switch to relay then it looses pwr from relay o solinoid somewhere . We have fears the...

Thanks heaps guys , just 1 more question if ok ? I just tilted the cab & disconnected the wire to each coil to try & find out which coil & stem the aux hyd work off , there s 2 coils on top of valve bank & 1 going into the side of Bics . But I disconnected 1 coil at a time then ''ALL 3'' & the...

Mech replaced the seals on stems but the dealer said I should have replaced them . One of those stems is $650 ! Is the stems & coils the only thing that controls the flow for the Aux Hyd ? or is there more inside the control valve ? My machine has 7000 hrs ive spent $5000 since xmas I need to...

No Stems havn't been replaced . Will look into that today . Yes once the problem happens stays like that for a while , sometimes after shutting the machine down for say 1 hour it comes good but yesterday it didn't .

Hi , I have a 1999 763 thats giving me Aux Hyd problems . It wont let me open the 4 in 1 bucket but will let me close it . Ive thrown $ 1000 trying to fix this problem with the mech but no luck . I have replaced the coils several times , resealed the valves , replaced the 4 relays , installed a...

My Hyd pump housing has cracked on my 763 so I have to replace the pump , just went to tackle the job & found the two bolts holding the pump in place are allen headed type bolts & are a real pain to access ! Anybody found this and have done this job , I dont have the correct tools right now what...