Recent content by Skid_der

Has anyone ever converted their skid steers from low flow to high flow? There is a kit out there to convert 216B, 226B , 2232B and the 242B. Would like to know what s involved....if it comes with instructions ... Thank you

Sorry forgot to mention that it's a 2004 cat 226b.

I be been looking up hydraulic pressure specs for auxiliary attachments..websites I found talked about hydraulic pressure at loader. 15.6 gpm @ 3300 psi. Now is that the pressure at the bucket or at the auxiliary ports .?? Do they share the same pressure?? Thank you

Does anyone know or ever had to measure auxiliary pressure at the exterior ports? Thank you

When I looked up the flow on the char Lynn 2000 series on the 6.2 it shows MAX Speed (RPM) @ flow continuous to be at 742 rpm...and in the chart it show the Pressure (psi) continuous to be 3000 psi. Does this mean that at 3000 psi this 6.2 CID motor should turn 742 rpm? How did you came up with...

You think I m going to loose performance from the blower at 523 rpm? How much torque difference is there between the 5.5 and the 6.2? Tx

Also looking at the same motor but SAE 12...

I am looking at a blower that has a 24" fan...540 rpm....64" wide....4 blades... PTO shaft has a 1 1/4" key....same as the hydraulic motor....I was looking at the Char-Lynn 2000 series: 1 1/4 Shaft, 6.2 CID, SAE 10, 742 RPM, 2630 Tq, 254083 torque is 2630 in.lbs. i want to connect it straight on...

Another thing I would like your opinion on is what do you think is best for what I m trying to do a 540 or 1000 rpm blower???? And what about blades on the blower fan...does it make a difference in 4 or 5 blades???? Thank you

And yes!!! I am converting a PTO snowblower to run on my skidsteer... Thank you

The snowblower is rated at 540 rpm and I plan on putting the motor directly to the blower fan..I calculated flow for sizing a motor...here is a Char Lynn 2000 series motor that I looked up....what do you think about the specs according to my skidsteer flow.???,.Char-Lynn 2000 series: 1 1/4...

It s a 2004 CAT 226B....maybe if someone has a snowblower on his I could get the Motor model number off his. Thank You

Is there anyone that could help me with this one.... My skidsteer puts out 15.6 GPM @ 3300 psi...I m looking to install a new hydraulic motor on this snowblower.... What would be the desired RPM and torque formy skidsteer... I phone a couple places that sells hydraulic motors and they are asking...