Recent content by sauciechick

So is your attach plate a lot wider? On mine, it is a regular size quicktach, but I have a bent? pin on one side - thus have to do some grinding on the outside edge of some attachments. Not much grinding.

Thanks so much. Probably going to pursue this further in the spring if I can get ahold of a articulating mower.

Specifically, I am looking at an articulating brush cutter. It is on an arm so you can cut the tops of trees. But also, I could foresee a snowblower and a 6-way blade. Thank you.

I have a 1995 Bobcat 953 (S#513111100). Is it possible to add an auxiliary electrical hookup so I can run multi-function attachments? Thanks!

Wow - this is getting really frustrating! Machine started working properly. It set overnight and when the mechanic went to test it in this morning, it was back to the original problem, which is: Bucket arms are raising and lowering. Tilt will go up, but bleeds down (can hold it there with foot...

Thanks Tazza and Bobby - were going to try these things out and I'll post back.

Thank you. It's a 1995, and does have the BICS control in the cab. I'm trying to find out what the lights are showing.

Thank you -any idea where to start looking for a fix?

Sorry - tilt no longer works (wish you could edit after you posted) LOL

The tilt now longer works at all, and the lift arms went up but will not lower. Thank you

Serial number is 513111100. Checking if any error codes.

We bought a used Bobcat Skidsteer 953 that was leaking hydraulic fluid and the tilt wasn't holding. Took to a mechanic, who said the tilt valve was bad. Replaced the tilt valve, and the leak stopped but the tilt still didn't work. Rebuilt the hydraulic cylinders and everything worked on the...