Recent content by ranger505

Hi there was not successful in my adjustment. How did you turn out with yours

Thanks for all the info going to try it Saturday

Anyone know how to check the belts on the case 1818 they look fine to me but but I think that is my problem not being able to lift anything heavy getting a squealing noise at times

Thanks all, finally got around to try and work on it. Belts seem ok how ever the lever on the side used to I engage it to neutral but when I picked it up from the guy that put belts on it doesn't engage into neutral anymore. Don't see any leaks anywhere

Do any of you all have any pictures of your case? 1818? I’m looking for pictures on the lines that go to the cylinders that lift the boom I took all four off to get replaced and I’m thinking maybe I have them crossed as they are the same fittings, having issues with the boom going up with a load

I recently replaced all four lines going to the hydraulics. There are two lines per cylinder. I’m hoping I put the correct lines back the way they were. They have the same fitting. I’m going to research that and see if I can figure out if I have them correct or not.

I found the leak it was not any line. There is a broken weld on the side allowing oil from where the chain is to leak. Now need to figure out why my bucket with a load won't move very well

I will take a look at that thanks

Hi all, I need some help. I have a case 1818 skidsteer. The bucket with a load in it struggles to go up at times it won’t go up with it empty it will go up and down easy this just started happening I noticed I do have a leak today I power washed all the old crud and after moving it I noticed a...

does anyone know the capacity on the hydraulic fluid as well as what weight to use

I bought a mustang 440 with a V6 in it I have to pick it up this weekend supposedly it don’t run. My plan is to find something smaller any suggestions on a motor Or should I leave the v6. I was surprised when I seen a V6 in the loader. Not sure if the motor is a ford. I’ll post some pictures

Was able to upload three pictures. Let me know what you all think. Thanks.

Hi, I just picked up a Mustang 440 skidsteer. Has anyone seen a V6 in one before I find it odd that they put such a big motor in it does not run probably going to take the motor out. Any suggestions on something inexpensive to put back in trying to figure out how to post pictures as soon as I...

Hi all, I have a 1992 case 1818 skid loader recently the tilt bucket was sluggish so I put a new hydraulic filter and new oil thinking maybe it may help. Today I was moving gravel and the tilt and the up and down is real week. I took it to a shop to put belts on it about eight months ago. It has...