Recent content by PSBBNova

I am in need of a bucket tilt cylinder for a LS180. Mine is not rebuildable. Many differant models will fit, please let me know what you have. Would also maybe be interested in all 3 engine mount isolators if there in good shape.

Oh yes ok, ive had that off 100 times by now. Thanks for the help.

Thanks for the reply, what are you referring to as the drive centering block? Just want a good idea before I start tearing in to it.

I have a 2003 ls180, is it possible to slide the pumps far enough back to replace the orings where the mount to the mounting plate without removing drive motors or tilting cab? Thanks in advance

Thanks again for another very informative post. I will buy the same brand oil just aw68 and top it off. According to the manual, the gauge will read cold until it reaches a certain temp (still neeed to find out what that is) then start showing the actual temp reading.

Oh one other thing, the system is still slowly bleeding itself, is it ok to top off the aw32 with aw68? to get it a little thicker?

Thanks for the great replies, I guess I will run this oil for a bit then like you said go to a little thicker oil. Wiered thing is my hydraulic temp never changes from cold, could this be a bad sensor?

This is my first post on this site, I have done my research but still cant really get a definite answer on it so I will ask here. I just recently got a 03 New Holland LS180 and popped a hose, and lost all my hydro fluid. So I drained the rest of the system, my question is; is it ok to run ISO...