Recent content by mtautoken

Thanks for the reply Tazza. I got the unit back from the electronics shop yesterday, but I won't be able to get it over to the machine until this weekend. I'm just very doubtful that it is fixed. After a little more thought and gazing over the wire schematic, I really need to know what the...

I have a T300 all electronic unit built in 2006 and the hour meter started reading only with the upper or lower half, can't recall which. There was a similar post/help request but no real help was given other than swapping the panel out to verify. New is over $400.00 I have the service manual...

I found a kit and some products online that I was wondering if anyone has tried or has any knowledge of. Or does anyone have a better suggestion? It sucks to have 80% of your tracks tread life still left and a cut track exposing the cables. The machine is a Bobcat T300 14" wide tracks as I...

I didn't see your reply until I finished the job, but thanks for the help. As that was exactly what I did to remove it, after heating it up with the cutting head it came right out with a force screw setup and the piece of pipe I welded onto the bushing. What a job. My tapered pins were wobbling...

Yes I have the replacement bushing. I picked up a setup that uses a forcing screw to pull it out and I will try that today. Thanks

A while back my T300 built in 2006 was not charging after about 1600 Hrs. I checked the system out and determined the alternator assy. was the problem. I looked into a regulator/brush assy. hoping I just had worn out brushes. I guy I talk to trying to match up this assy. at an alternator...

I read a post that talked about welding something to the old bushing and using a slide hammer to remove it. I welded a piece of 1 1/2" pipe to the bushing the used another piece of 1 1/2" pipe as a drift to beat the bushing out, I even used a carbide bit to remove some of the metal that had...

Thanks Guy's for all your input. I'm going to buy the dealers oil. But I'm not letting this one go just yet. I will continue to research for a better price. I think if someone was to buy this oil in quantity, repackage it in a single use size, they could probably make a decent profit and still...

Siduramaxde posted a hub repair on I think a T200 late last year and he used a NAPA Syn. Gear oil. Has anyone seen or heard of any track record with using generic Syn. Gear oil in these hubs? My BG addative rep is looking into some oil and addative for me. I will post what ever he finds. Some...