mrbb's latest activity

When computers are on the machine, I say your correct. If not, then I would still disconnect the battery and ground the unit well then...

well as dumb luck has it, I ended up finding this out today! I was looking over my skid steer and noticed my rear door over radiator...

I think you have to check the seller, and NOT EBAY, ebay doesn't make anything I know of or sell anything, its private sellers that...

MY 2 cents and no expert by any means but I know a few guys that have welded on there machines, and all they did was disconnect the...

Normally they are really good at answering any questions. I have always had a good experience with them but I have only purchased...

I found them extremely helpful and knowledgeable when I was having drive motor problems and would not hesitate to call them again.

While you have the connectors apart, I like to dab some dielectric grease on the contact points to keep corrosion at bay ...

JCB also has a extendable boom if you need it,besides the side door.

well on many of these older machines, they use Motor oil in both systems(10w/30) , motor/engine, pending what one prefers to call...

Well unless he just did a oil change, you should be able to tell if its hydraulic oil or engine oil without any dye.

I know this maybe isn't an option, but have you maybe thought of trading your machine in for one with a side door? as a side door model...

add some oil dye to one or the other and see if it shows up leaking out! they sell it at most larger chain auto parts stores!

New to skid steers in general but have a automotive background and currently working with t66's bobcats. I was wondering if there's...

Aaahhhhhaaaa! Yea, I think you're correct the spring towards the engine. A quick googling and the internet agrees also. You can probably...

On my 742B I put the rear wheels up on blocks, filled a garden sprayer with diesel{kerosene works good too} and hosed all the internal...