Recent content by mark48

Start with the wiring diagram and see what else may be in the circuit. As others have commented the problem probably arises because of bad ground or loose/contaminated connection

I have 12V to switch but when keyed on the accessory voltage as well as the battery voltage both remain at 0 volts. I've isolated to circuit 13 which includes the seat and restraint switches both of which work. I've checked all the grounds. I have also replaced the switch, the solenoid and both...

My GEHL 5635 won't start below freezing. The glow plug preheat, turn key to left, doesn't stay on (the light illuminates and then switches off). So the question, is it the relay? I've cleaned terminals and connector, no change, or is it the switch? If it's the relay why would it initially close...

I don't know anything about your model. I have an immobile 5635 and to move it I have to disconnect the drive chains in the gear case which I'm about to do to haul it in to a shop. Since the parking brakes need hydraulic pressure to release your only option is to free up wheels from the drive motors