Recent content by Jlelectric

I believe I have narrowed it down to an electrical issue. I started checking electrical connections from pressure switch back. Now getting 05-09 light instead of 05-14 shutdown. I am also getting the glow plug light, which never worked. I think Im getting somewhere. Anyone know where the common...

I did adjust the stop bar for the idler pulley. Got it all back together. Low pressure shut down is happening again. Did great, lifting and driving, full performance. After about 5 min. the warning light came on for low pressure 05-09, so I shut it off. Next time I started it, warning 05-14 shut...

Thanks for the prompt reply. Most of the you tube videos are you the other type tensioner. I plan to leave the machine tore down until I find some information. Maybe someone will chime in soon. The air box was a challenge to remove.

I am having issues with the low pressure shutdown. Decided to check belt. Removing everything to get to the belt. Belt seems a little loose. The manual states to move stop to idler arm on tensioner pulley and tighten. The stop is locked all the way back now. Should I loosen and push forward and...

Thanks for the help. I removed everything to get to the belt. The stop bar was pulled all the way back. According to the manual the stop bar needs to be pushed up to the tensioner arm and tightened. Am I correct? I think with it pulled back, the belt would jump and cause slippage.

It is my fathers machine. They barely use it around the farm. The last couple years the light would come and go showing the 05-09 code cold or hot. I brought it to my house, same thing happening. Changed drain filter and pressure sensor and now 05-14 code and shutdown. Kind of why I thought...

I have a 2007 Bobcat T300 with about 5000hrs. Serial # 521911286. It runs out great, slight hydraulic leak when parked. The problem is that I have been having an intermittent Charge pressure light coming on (05-09 Code). Been coming off and on for quite a while. So I changed the case drain...