Recent content by Jimh64

I was thinking, if no one knows where I can get a manual, I really only need to know if I can take the bottom offf the housing off from the bottom, or if I have to start from the top. Maybe someone can help with that.. Thanks!

I have a 30C auger for my 843 and the housing on the auger has a chip missing in the drive unit. It is at the bottom, right where the shaft comes out of the drive unit. When there is torque, this chip allows the seal to come out and I lose fluid. I am looking for a manual that shows how to...

Thanks for the reply,, I doubt it as we have been moving both levers back on forth trying to figure out what is wrong, but I am willing to try anything at this point! Thanks and I will reply back and let you know.

We had to do some engine work to our 843. When putting the motor back in everything was turning freely (The Crank and Flywheel). We know this because we had to turn it a little to get the splines to line up. We bolted down the motor and attempted to start it. The starter engages, but then clicks...