Recent content by iah

Help Support SkidSteer Forum:

  1. I

    Model #s

    I put that number into the online Bobcat parts catalog and it came back as a 773
  2. I

    Titan Grapple

    I used a borrowed one last summer for several weeks and it is what I would purchase, based upon price/value, if I needed to get one for myself.
  3. I

    Toolcat Rear Tierods

    Check out this Youtube video https://www.youtube.com/watch?v=NSgVQ3EmX44&t=86s
  4. I

    863G hydraulic pump number 6675660

    Thanks, If your 873 SN is 514140001, 514240001 or 517911001 and above it should have the same form factor. So even if the number on your pump is not 6675660 it will have the same shaft protrusion dimensions, which is what I am wanting to get.
  5. I

    Looking for Wornout/Junk 6675660 hydraulic pump

    I am going to replace OEM pump with an off-the-shelf pump having about 30% more displacement. From what I can determine from photo's the OEM pump's shaft does not protrude as much as the typical off-the-shelf pump. I'll need to fabricate a SAE B 2-bolt spacer to mount between the gear pump and...
  6. I

    Looking for Wornout/Junk 6675660 hydraulic pump

    This is one of the pumps used on std flow 863 G models. Price needs to be pretty cheap because I will have to ship to Alaska.
    • iah
    • Thread
    • Replies: 3
    • Forum: Wanted
  7. I

    Looking for Wornout/Junk 6675660 hydraulic pump

    This is one of the pumps used on std flow 863 G models. Price needs to be pretty cheap because I will have to ship to Alaska.
  8. I

    863G hydraulic pump number 6675660

    Greetings, If anyone happens to have one of these laying around I would appreciate it if you could measure the input shaft length relative to the mounting flange mating surface. And maybe take some good close up pictures of that area. Thanks Ian
  9. I

    Increased 863G hydraulic pump flow?

    I am looking for information about the manufacture of the OEM pump (PN 6675660) and any possible aftermarket pump replacement sources. I know the shaft is 7/8" and has 13 splines , I don't know the OEM manufacturer, pump displacement, operating RPM range or the technical specs for the mounting...
  10. I

    What brand of electrical connectors on 2001 863G

    Is it possible to attach images to posts on this forum? If so I am not seeing where to click.
  11. I

    What brand of electrical connectors on 2001 863G

    The connector is labeled C630 on the HVAC Harness - 6725933 schematic. It is a three conductor socket (female) physically near the heater motor connector. I'll send picture when I figure out how.
  12. I

    What brand of electrical connectors on 2001 863G

    I am wanting to make an extension harness that connects into an existing unused connector and was wondering if somebody here knew the brand and connector series info on the connectors Bobcat used in the 2001 time frame. Thanks Ian
  13. I

    Deutz BF4M 1011F turbo boost specification?

    Hi, I recently purchased a 2001 863. It smokes some at hi-idle and more at rated RPM when under load. Air filters are new. I am wondering if the turbo's boost output is low but I can't find a boost pressure specification for this engine and was wondering if someone on the forum knows what a...
See more
Top