Recent content by hybridvigor

Thanks for the reply. I will try it in the morning.

Here is the dumb question for the day. How do I turn on the hyd to run a back hoe attachment on my 7753? It worked great on the 743, but I can't figure out how to make it work on the new machine. Thanks

I talked to them and it is missing the parts that I need. Thanks for looking.

There is a 773 and a 753 manual. Which one is the same as the 7753? The only junker that I could find was missing that part. I have the parts on order from Bobcat.

It looks like I am missing the centering mechanism on top of the pumps. Any idea where to find one without going to the dealer?

It runs and drived fine, just wants to drive before I am ready. Is the 7753 the same manual as the 753?

I bought this 7753 that was/is a basket case. It had a rear wheel bearings out and was torn apart. I have it back together, but it wants to drive when it starts. My old 743 centered itself when you let go of the controls. Seems like it had some springs that centered it. Am I just out of...

Thanks for the quick replies. I better go see if I can get bit back together.

Do you have a link to download the manual?

I am working on my 7753 and forgot to ask bobcat how much and what kind of oil goes in the chain case. Can anyone help?

Just wanted to say thanks for all the help. It fit fine without having to do any tire swapping. The horse liked having a little company in the trailer on the ride home.

I have a belarus tractor that I put a head gasket on. The parts were cheap from parts for belarus. http://www.partsforbelarus.com/ The tractor started this winter with out any starting fluid of glow plugs. It is a crude engine though. Good luck.

Thanks Ken! I think I will just pull the tires and wheels from the 743 and take them along, just in case.

I am also picking up a horse on the same trip. I would take the flatbed trailer, but I don't think my wife would be happy with me hauling her new horse on the flatbed. Is there anyone with a 7753 that could measure the actual width or let me know if the wheels will fit from the 743?

Ken, Thanks for the quick answer. I didn't want to pull the tires from the 743 unless I have to. Do you know if the wheels have the same bolt patern?