Recent content by hvyduty

Press the snail button and set the speed to what you like 1-99 57? is standard?,then press and hold the snail button until it beeps and set is displayed.This will now be your default snail button speed even if you turn the machine off.

DR-2 is a reference to drive responce option not a fault . 1) Hold “Press to Operate Loader”button–3 seconds. 2) Change setting via upper buttons on left handle. 3) Press & hold the Press to Operate Loader button until SET is displayed to permanently set the new level. 4) Operate the machine in...

A engine RPM sensor not working will not allow the brake in the motors to release.I have disconected mine from time to time for security reasons.

HI T2,There is plenty of threads on this subject already, Anyway I had a simular experence a couple of years ago.I replaced the oil in both drive motors with the bobcat synthitic oil .one motor was full the other had a small amount of black smelly goo. 20 hrs later without warning(leaks, noise...

I believe the electric's will be fine as long as it was fresh water. The computer is a sealed unit and all plugs should be sealed as well as being packed with electrical grease/goo.They usualy cop a good wet down with a pressure washer regually and survive. Also how ,how deep and how long did it...

Ok, Engine running seat bar down you should have one light showing???(seat bar). when you push the green button the other three lights will come on???If not it may be the green button playing up( left hand pannel).This will not produce a code.A solonoid/coil or wiring fault with the joysticks...

The serial number is also located on the chain case ( rh front corner/rh front axle).

Have a look at a Forestery Cutter by Bobcat.I have watched one of these At work clearing fire trails -very impressive in deed-This or simular brand /style attachment should eliminate 2 of the three stages in your job.As for loaders ,yes track for sure for stability/ traction on slopes A...

http://ettf.net/archives/11012 Ok they changed it so you need a log in.try this one or google "Nissan soccer"

http://www.coloribus.com/paedia/reels/2008/08/21/513478/ The ad can be viewed from this site.

Tazza I can,t help with the pumps although there was a set of new drive motors on ebay Australia last week, i don't think they sold he was only asking $350??each.

Oh yeah there is also a DVD linked to these books, not sure what is on it

If anyone is looking to but this book be aware there is two versions "Bobcat fifty years"and "Bobcat fifty years of opportunity"The "opportunity" versions is only avalable through dealers and is a limited edition, it also has 48 more pages.

The knock was more than likley oil being picked up from the crankcase through the breather and burning in the engine .I have be told duetz engines will do this if the loader is tiped over reving the engine until either it runs out of oil or blows up,either way not good.so to get yours to stop is...

Yes it is easy to access the downgrade option only once you have access pass words to the machine.I have done the same thing as you and was stuck on site in the middle of no where.I contacted a dealer and explaind my situation to him ,he then asked me to put it in writing and fax it to him with...