Recent content by Frank Rizzo

Help Support SkidSteer Forum:

  1. F

    How do I clean case drain filters?

    Case drain filters from your local dealer can be had as an "element only" which means you do not have to buy the complete housing and all, they are part number 6661807. This is one filter I would not skimp on as it is your last lifeline if a motor/pump shells out. As for having some plastic...
  2. F

    High Flow couplers ( Where to Buy?? )

    Disregard what I just posted, I didn't see you were talking about ASV parts. I am sorry.
  3. F

    High Flow couplers ( Where to Buy?? )

    What machine are you running? The OEM Bobcat couplers will flow the needed GPM using the standard male/female couplers. Assuming you have the newer style manifold on the arm setup you will need 1 of part number 6674688 and 6672960 which should run you about $90.00.
  4. F

    Engine Oil Filters

    Donaldson makes the Bobcat OEM filters FYI. As for the dealer being about the same price as aftermarket it seems hit or miss but as a whole when doing a complete service the dealer is usually right with the Napa's, carquest's, and etc....
  5. F

    BOBCAT 444 CLUTCH ?

    There should only be one clutch lining per side. The clutch lining part number is 6649871 and retail for around $24.22. I have a diagram if you need one so just let me know. He would be correct in saying the bucket and boom are just fine as the lining only controls the drive.
  6. F

    Motor bad in 721 any motor options?

    The 721 and the 720 use the same U-joint, pump yoke and adapter. The only thing I see that is different is the way the U-joint mounts to the flywheel of the engine. The U-joint is part number 6598347, the yoke is part number 6540658, and the adapter is part number 6540655. Let me know if I can...
  7. F

    Door for Bobcat

    The glass for the "K-series" machine is the same glass used in the "G-series" machines which is part number 6729776 and can be had at the local dealer for under $200.00 brand new. A new door assy(6730822) will run you almost $1,000 which is a complete assy including washer tank, threashold...
  8. F

    Where to get used Bobcat parts

    There is a Bobcat salvage yard in North Dakots called Buddys. I don't have his number handy but do a google search and you should be able to find it. Good luck
  9. F

    773 hydraulic pump

    What serial number is your machine? Give me that information and I can help you locate the correct pump.
  10. F

    Need you guys help on my s160

    Right hand bobtach levers are part numbered 6702904 and the left hand lever is 6702903. Each lever runs right under $51.00 at the local dealer. As for a bucket, do a google search and you will come up with more than enough reading material. One thing to watch out for when comparing buckets is...
Top