Recent content by fordfairlane84

Ok, thank you very much! Do you know what that cover is over the seal? The cover does not bolt to anything and rides on the crank shaft, and gets hot! I took that cover off and the seal itself is seeping oil slightly, I have not lost oil in the machine significantly. I would like to see if...

I did not replace part 40, I will check for it to replace, and order the part. Thank you! I have a bigger issue. I took the flywheel off and all the bolts that hold the bell housing to the motor have backed out. There were 4 or so in a pile behind the flywheel. I think this has to be the...

Yes, Serial: AJDT16280

I have a 2018 T630 with 1850 hours, I recently replaced the idler pulley, tensioner, and belt for the main drive from motor to hydraulic pump. The job seemed to go well, got the machine back running and used it a few days. The old pulley had nothing left in the bearing, and wore down the...