Dave1234's latest activity

I have this manual that covers maybe all Bobcat loaders and 320-341 excavators up until at least 2001. It has all the specs of each...

That looks like what I bought. FYI, I am looking to buy a mikuni carb with the sight glass for parts if you obsolete yours--webb12051...

I did much the same--bought an ebay carb, made a 1/2 inch spacer, made a longer governor rod, made a new connector piece to go on the...

The direction no one seems to be talking about (maybe for good reason) is something custom made or custom adapted. You may or may not...

Those of us who hot wired cars in the distant past and drove them that way discovered that without the resistor in the circuit, you...

my 4g32 was also hard to start in all weather--too much cranking required for starter health, even with a bulb pump to make sure fuel...

Not sure if Dave1234's YT video helps apfisch or not, but it sure helps me!!! That spark plug video has info I have never heard...

Thank you!

Reading spark plugs got me wondering if there was more than I knew--WOW Check this out. Several other similar youtubes if you search. .

I have the same hose seeping. Can you keep us posted on what you encounter? I need to get to mine once the weather gets reliable to...

Amazon shows that carb for a 196 cc engine--I doubt it could ever supply adequate fuel to your 1700 cc Wisconsin motor. Might be worth...

Any progress? One observation--gasoline weighs ~ 6.2#/gal, while water weighs ~ 8.3#/gal. If you filled your carb so that the water...

With the chinese carb you tried, what jet(s) did you find gave you the best for torque mix at full throttle, please, and which jets did...

Hope this is helpful--from what I saw on the aftermarket sites--this one http://www.megamanual.com/v22manual/minj.htm#size One of the...

I would be suspicious of a vacuum leak first--PCV valve, vacuum line, loose carb to manifold nuts, bad carb to manifold gasket, bad...